Tooling handled end to end · 5,000 pcs min · 20-minute quotes

Send artwork
AnvilPins Custom pins & cast metal goods

Guide

Artwork for die cutting: what we need and why

File formats, line weights, colour references and the five things that turn a two-email enquiry into a same-day quote.

0.25 mm min OUTLINE / ZOOM
Artwork, plan detail · 0.25 mm is the floor for a line that casts and fills cleanly

Why the file decides the timeline

A die is cut by a machine that follows vector paths. If your artwork arrives as vectors at the right size, the tooling shop starts the same day. If it arrives as a 400-pixel JPEG, someone has to redraw it first, and that redraw is the single most common reason a first order runs late.

This is not a formality. A redraw has to be approved by you, which adds a round trip, and a round trip on a three-week lead time is how a two-week buffer becomes a missed event.

What to send

Format Good Why
AI (Illustrator) Best Editable paths, clean layers
PDF (vector, not scanned) Best Check that text is outlined, not embedded
EPS Good Vector paths, widely supported
SVG Usually fine Vector, but fonts must be converted
PNG / JPG / photo Redraw needed Converter to vector paths before tooling
Word / PowerPoint Redraw needed Layout files, not artwork

Size matters as much as format. Send the artwork at the finished size in millimetres, not scaled to a poster. A pin drawn at 300 mm has to be redrawn proportions and all for a 32 mm die — and small type that looked fine at 300 mm will disappear.

Line weights and small type

A die cuts metal, so there is a physical floor on how thin a line can be. As a working rule:

If you are unsure, print your design at the finished size and hold it at arm's length. If you cannot read it there, a pin cannot either.

Colour references

“Navy” is not a colour. It is a mood that means three different inks to three different people. Send one of these instead:

There is no cap on colour count for die-cast enamel, and the number of colours does not change the tooling price. What colours can do is make a design unreadable at 30 mm, which is a design problem rather than a production one.

Gradients, photos and fine gradients

A die-cast enamel pin cannot reproduce a gradient or a photograph. The process fills flat colour into recesses. If your artwork contains a gradient, you have three options: flatten it to bands of solid colour, simplify the illustration to line art, or use a printed pin instead, which handles photographic artwork but does not give you the metal outline.

A checklist before you email

  1. Vector file, AI / PDF / EPS, text outlined.
  2. Artwork at finished size in millimetres.
  3. Pantone number or physical sample per colour.
  4. Quantity per design and whether the back is a pin, a magnet or a keychain fitting.
  5. The date the goods have to be in your hands.

Five lines in an email, one attachment, and the quote comes back with a tooling cost and a date instead of a request for more information.

Keep going

Send your drawing, get a price the same day

Artwork, size, quantity and deadline are all we need. A specialist replies with tooling cost, unit price and a delivery date, usually inside 20 minutes.

Request a quote