Soft PVC charms
Moulded soft PVC, flat 2D or rounded 3D, in the same colour references we use for your enamel. Fitted with a chain, a ring or a pin back.
Quote PVC with your pins





Tooling handled end to end · 5,000 pcs min · 20-minute quotes
Send artworkSample book · other items
Pins and badges pay for the tooling. The rest of the set is where an order gets remembered, so we quote PVC, plush, acrylic, frames and markers into the same carton instead of sending you to a second supplier.
Nine lines, one carton
Photographed in our workshop, not stock images. Each line below is quoted with the pin order, packed in the same carton and shipped as one delivery with one contact. Keychains with a split ring live on the keychains page; the cord-and-strap version of the same casting is line 09 below.
Moulded soft PVC, flat 2D or rounded 3D, in the same colour references we use for your enamel. Fitted with a chain, a ring or a pin back.
Quote PVC with your pins





Flat cast markers with colour filled into the recess, sized to sit under a ball without lifting it. A common add-on for tournament and club orders.
Quote markers with your order


Soft goods built to your character drawing, with the embroidery and hang tag artwork prepped in the same proof as the pin that goes with it.
Quote plush with your pins



Small sculpted figures for collections and gift sets, painted to the same colour references as the pin in the set.
Quote figures with your order

Clear printed acrylic, cut to shape with the print sealed on the reverse. The cheapest way to put full-colour artwork into a set.
Quote acrylic with your order
Cast frames with a printed insert, engraved name or club crest on the surround. Mostly ordered for awards and retirements.
Quote frames with your order

Flat metal bookmarks with a printed or colour-filled face, often paired with a library or school pin order.
Quote bookmarks with your order
Cut and finished in stainless steel rather than die-cast in zinc alloy: harder edge, brighter under plating. We quote both materials side by side when a piece has to take daily wear.
How we choose the material
The same zinc alloy casting as a keychain, fitted with a cord and a flat strap instead of a split ring, so it hangs from a phone case or a bag. One die, one colour reference; tell us the fitting per design and we pack them in the same carton.
See the casting on the keychains page

A pin order starts with a die. That die, the casting, the colour filling and the packing already exist on one floor, so anything else in the same set can be quoted on the same sheet and shipped in the same carton. The alternative is what most buyers end up doing: three suppliers, three sets of shipping costs, three colour references that never quite match, and three chances for a delivery date to slip.
Everything on this page is photographed in our workshop. Where an item is not made from die-cast zinc alloy, we say so plainly below rather than pretending every part of the set comes off the same press. Keychains with a split ring are on the custom keychains page; the cord-and-strap version of that same casting is line 09 here.
Moulded soft PVC, either flat in 2D or rounded in 3D, in the same colour references used on your enamel. It is the cheap way to get a soft, rounded version of the character on your pin, and the usual fitting is a chain, a ring or a pin back. Because the mould is cut rather than engraved, fine type below about a millimetre stops reading, so we redraw small lettering thicker at proof stage.
Flat cast markers with colour filled into the recess, sized to sit under a ball without lifting it. They are ordered almost always as an add-on: a club crest marker next to a crest pin for a tournament, packed together. If you also want a divot tool or a cap clip in the same set, say so with the drawing and we quote the pair.
These three go together because they all start from your artwork rather than from a die sunk in zinc alloy.
Minimums on these are set per item, not per order, and we tell you the number with the quote rather than hiding it behind a form.
Frames and bookmarks are the quiet half of the catalogue: cast frames with a printed insert and an engraved name or crest on the surround, ordered mostly for awards and retirements; flat metal bookmarks with a printed or colour-filled face, usually alongside a library or school pin order.
A phone charm is a keychain casting with a different fitting: a cord and a flat strap instead of a split ring, so it hangs off a phone case or a bag. The metal piece does not change, which means the tooling is the tooling you were already paying for, and the colour reference is the one already approved for the pins in the same set.
Two fittings, one die. Say which fitting each design needs — split ring, cord and strap, or both — and both versions ship in the same carton with the pins. The casting itself, its size and the die fee are set out on the custom keychains page.
Most of what leaves this building is zinc alloy, and for pins and badges that is the right material: it takes fine line work, holds soft and hard enamel, and polishes to a bright edge. Stainless steel is the other option we quote, and it is genuinely the better answer when a piece is handled every day, lives on a keyring for years or has to pass a salt-spray test. Send the drawing and we will quote both materials side by side so you can see the difference in cost as well as in wear.
A specialist replies with tooling, unit price and a delivery date, usually inside 20 minutes during working hours. Anything you are unsure about, send it anyway; the questions we ask at quote stage are cheaper than the ones we ask after a mould is cut.
Yes. They are quoted on one sheet, packed into the same carton and shipped as one delivery, with one contact and one packing list. Mixed designs across items are normal for us.
No. Minimums differ by item and by material, because a moulded PVC charm and a plush toy are not the same run. Send the drawing and the quantity you want for each line; we come back with minimums and prices per item.
That is the point of doing them together. We match to the same colour references used for your pins, and send a proof of each item against that reference before production starts.
Zinc alloy for fine outlines and enamel in the recess; stainless steel when the piece is handled daily or has to survive a salt-spray test. The production page sets out what actually changes between the two.
The main line: flat and half-relief dies, soft or hard enamel, 5,000 pcs per design.
Enamel pins →Cast plates with a split ring, bulk runs and mixed designs on one order.
Keychains →4,000 m², three die-casting presses, 120 staff, BSCI and Sedex audited.
See the floor →Artwork, size, quantity and deadline are all we need. A specialist replies with tooling cost, unit price and a delivery date, usually inside 20 minutes.