Custom pins · zinc alloy
Custom pins, cast and finished under one roof
Flat-die and half-relief pins from 5,000 pieces per design — tooled, cast, colour-filled and packed under one roof in Dongguan. Send artwork and a specialist answers with tooling cost, unit price and a date, usually within 20 minutes.
- Die-cast in zinc alloy
- Flat & half-relief
- BSCI & Sedex audited
Two dies, drawn in section
What the extra money actually changes
A cross-section is the honest way to compare the two dies. The flat die keeps one plane, with colour sitting in the recess. The half-relief die steps the centre up from the rim, so light has something to fall across.
What a custom pin order looks like here
An enamel pin is a small metal pin with colour filled into the recessed areas of the casting. We die-cast them in zinc alloy, fill the colour, assemble the back and pack the carton in one building in Dongguan — so a single order carries one tooling cost, one colour reference and one date.
The minimum is 5,000 pieces per design, and that number decides whether we are the right supplier. Schools ordering annual awards, clubs, event organisers, brands running a campaign and distributors restocking a catalogue are the orders we are built for. A one-off gift is better served by a print-on-demand shop, and we would rather say so than waste your week.
Two dies, two different looks
| Spec | Flat die | Half-relief die |
|---|---|---|
| Tooling | RMB 700 per design | RMB 1,200 per design |
| Surface | One plane, colour sits in the recess | Stepped levels, the design has depth |
| Best for | Logos, lettering, fine line art | Crests, characters, anything that needs shadow |
| Die life | 3 years or 300,000 pcs | 1 year or 50,000 pcs |
A flat die keeps the outline crisp and lets small text stay readable. A half-relief die lifts the centre of the design from the rim, so light falls across it and the pin stops looking flat on a jacket. If your artwork is mostly type and a mark, flat is cleaner and cheaper; if it has a crest or a character in the middle, the extra RMB 500 buys you the depth.
Prices, tooling and dates, stated outright
- Minimum — 5,000 pieces per design. Several designs can share one order and one shipment.
- Flat die — RMB 700 per design, charged once.
- Half-relief die — RMB 1,200 per design, charged once.
- Sample — RMB 200 per design, 7 to 10 days, produced on the production die.
- Lead time — 25 days for 10,000 pieces, 35 days for 50,000, 40 to 50 days for 100,000, counted from artwork approval.
Tooling and sample fees are stated in RMB; quotations and invoices are issued in US dollars, and freight terms are on the quotation so the landed date is visible before you commit.
Dies stay with us, and that is deliberate rather than incidental: a repeat order inside the die's service life pays no tooling again, and we match colour to the previous production run instead of remixing from a fresh reference, so year three looks like year one.
What to send us
- Vector artwork in AI, PDF or EPS.
- The finished size in millimetres.
- The quantity per design.
- The date the goods have to be in your hands.
If all you have is a photo of an existing pin or a hand sketch, send it anyway — we will tell you what has to be redrawn before a die can be cut, which is the single most common reason a first order runs late.
One order, one colour reference
Pins, badges, keychains and bottle openers come off the same casting floor and the same tooling shop, so they can travel as one order with one colour reference and one delivery date. When a programme needs a full set, medals and lanyards are quoted into the same shipment.
Before you email
Two things save a week: confirm the colour reference now rather than after the die is cut — a physical sample or a Pantone number beats the word “navy” — and tell us the real deadline in the first message. We would rather turn down a date we cannot hold than quote it and miss it.
Also on the same floor
Every part of the set, one order
- Zinc alloyCustom enamel pinsSoft or hard enamel, flat or half-relief die, 5,000 pcs per design.
- Pin-backedCustom badgesMetal badges for schools, clubs and campaigns, not ID or name cards.
- Cast, split ringCustom keychainsBulk runs, mixed designs on one order and one packing list.
- Cast, ground edgeCustom bottle openersBar, brewery and event giveaways, cast in the same die shop.
- 3D reliefCustom medalsQuoted into the same shipment, colour-matched to the pins.
- Woven, hardwareCustom lanyardsPrinted or woven, packed with the pins and badges as one delivery.
Buying by volume: bulk enamel pins · How to check an enamel pin supplier · Workshop notes on enamel, artwork files and backings
Questions buyers ask before ordering
What is the minimum order for custom pins?
5,000 pieces per design. Several designs can share one order and one shipment, and colour count inside a design is not limited. The minimum exists because every design needs its own die.
How much does tooling cost, and who keeps the die?
RMB 700 for a flat die and RMB 1,200 for a half-relief die, charged once per design and quoted in US dollars. Dies stay on our racks, which is why a repeat order inside the die's service life pays no tooling again and is colour-matched to the previous run.
How fast do I get a quote?
The target is 20 minutes during Dongguan business hours (UTC+8, Monday to Saturday). Enquiries that arrive overnight are answered first thing the next working morning.
Can I mix several designs in one order?
Yes. Each design carries its own die fee, and the whole order ships together with one colour reference and one packing list. Mixed-design orders are normal for schools and distributors.
How long is production?
25 days for 10,000 pieces, 35 days for 50,000 and 40 to 50 days for 100,000, counted from artwork approval. A sample takes 7 to 10 days before that if you want one.
Can medals and lanyards be quoted with the pins?
Yes. They are priced into the same shipment and the same colour reference, so one order, one delivery date and one invoice cover the whole set.
Send your drawing, get a price the same day
Artwork, size, quantity and deadline are all we need. A specialist replies with tooling cost, unit price and a delivery date, usually inside 20 minutes.