Custom badges
Cast badges for events, schools and clubs from the same tooling shop.
Custom badges →Tooling handled end to end · 5,000 pcs min · 20-minute quotes
Send artworkCustom keychains
Die-cast zinc alloy keychains for distributors, events and brands: 5,000 pieces per design, mixed designs in one order, RMB 700 flat die, 25 days for the first 10,000.
From the bench
Five runs photographed in the workshop, split ring fitted. Same casting as our pins; the fitting is the only thing that changes. The cord-and-strap version sold as a phone or bag charm is on the more items page.
A custom keychain made here starts as a zinc alloy casting off one of our three die-casting machines in Dongguan, then gets colour-filled, assembled and packed in the same building. The tooling shop that cuts our custom enamel pins cuts keychain dies too, which is why a keychain order rarely needs a second supplier discussion.
The word that matters on this page is bulk. A keychain sold on a retail site is one item, boxed, shipped tomorrow. A bulk keychain order is 5,000 to 100,000 pieces with a die, a colour reference and a delivery window attached — and the two are priced by completely different maths.
Four things, in this order:
Send the quantity and the size in millimetres with your artwork and you get both numbers — tooling and unit price — in one reply, quoted in US dollars.
Distributors and event organisers rarely order one design. You can put several designs into a single order: each design carries its own die fee, and the whole order ships together with one colour reference and one packing list. That is what makes us useful to a distributor restocking a catalogue, or a brand producing five regional variants of the same keychain.
Every keychain on this page leaves with a split ring fitted, because that is what the word means to most buyers: a casting, a ring, keys. The same casting can instead carry a cord and a flat strap — the version sold as a phone charm, a bag charm or a keyring charm — and it is quoted off the same die at no extra tooling charge. That fitting is photographed on the more items page, because the piece on the die and the colour reference do not change. Tell us the fitting per design and we pack them in one carton.
Dies stay on our racks. Flat dies are held for 3 years or 300,000 pieces, half-relief dies for 1 year or 50,000 pieces, and a repeat order on a die still in service skips the tooling charge. For a seasonal programme — the same keychain reissued every year — that is the difference between a margin and no margin.
A sample is RMB 200 per design and takes 7 to 10 days from artwork approval. It comes off the production die and the production colour mix, so the sample you sign off is the piece that gets cast.
These run from artwork approval, not from your first email. If your deadline is fixed by an event, say the date in the first message and we will tell you straight away whether the date is achievable.
Most of our keychain orders travel with something else: a custom badge for the same event, a custom bottle opener for the same bar, a set that ships in one carton to one address. Because all three go through the same tooling shop and the same floor, a mixed order keeps one colour reference and one delivery date instead of three.
Vector artwork (AI, PDF or EPS), the size in millimetres, the quantity per design, your deadline, and the number of designs if you are mixing. That is enough for a full quote — tooling, unit price and date — usually answered inside 20 minutes during Dongguan business hours.
5,000 pieces per design. Several designs can share one order and one shipment; each design carries its own die fee.
RMB 700 for a flat die and RMB 1,200 for a half-relief die, charged once per design, quoted in US dollars. The die stays on our racks for 3 years or 300,000 pieces (flat) and 1 year or 50,000 pieces (half-relief).
Yes. All three are castings from the same tooling shop, so they can ship together with one colour reference and one delivery date. Mixed sets are common for events and distributors.
25 days for 10,000 pieces, 35 days for 50,000 and 40 to 50 days for 100,000, from artwork approval. A sample takes 7 to 10 days before that.
Cast badges for events, schools and clubs from the same tooling shop.
Custom badges →Bulk die-cast openers for bars, breweries and events.
Custom bottle openers →Send artwork and get tooling, unit price and a date.
Request a quote →Artwork, size, quantity and deadline are all we need. A specialist replies with tooling cost, unit price and a delivery date, usually inside 20 minutes.