Tooling handled end to end · 5,000 pcs min · 20-minute quotes

Send artwork
AnvilPins Custom pins & cast metal goods

Bulk enamel pins

Bulk enamel pins, quoted by the thousand

Bulk enamel pins from 5,000 pieces per design: RMB 700 flat die, mixed designs in one order, samples in 7–10 days, 25 days for the first 10,000 pieces.

32.0
Round pin, plan view · Ø 32 mm · zinc alloy · 1.8 mm rim

One run, one tooling cost, one date

A bulk order is not a bigger version of a small order — it is a different calculation. One enamel pin bought as a gift is a stocked item with a shelf price. Five thousand enamel pins is a casting run with a die, a colour reference, a carton specification and a delivery window attached. This page is about the second kind.

Our floor in Dongguan runs the whole chain for a bulk run: die, casting, colour fill, assembly, packing. That is why a bulk order here carries one tooling cost, one colour reference and one date instead of three suppliers arguing about whose fault a colour shift was.

What sets the price of a bulk run

Four variables, in the order they matter:

  1. Quantity per design. The die is a fixed cost. At 5,000 pieces it is a visible line on the quote; at 50,000 it almost disappears into the unit price. This is the single biggest lever you control.
  2. Die type. RMB 700 for a flat die, RMB 1,200 for a half-relief die, charged once per design and not again on a repeat run.
  3. Colour count and coverage. The number of enamel colours inside a design is not capped and does not change the tooling charge, but every extra colour is extra handling per piece, and that shows up in the unit price rather than the die price.
  4. Finished size and plating. A larger casting uses more metal and more press time; plating choice affects both cost and how long the piece survives a washing machine.

Send the quantity, the size in millimetres and the artwork together and you get tooling and unit price in the same reply, quoted in US dollars.

Mixed designs in one bulk order

Distributors and event organisers almost never order a single design. Several designs can share one order and one shipment: each design carries its own die fee, everything ships together with one colour reference and one packing list.

That matters more than it sounds. A distributor restocking a catalogue with eight designs wants eight SKUs in one carton with one commercial invoice — not eight orders from eight suppliers that arrive in eight weeks.

Die life and repeat runs

Dies stay on our racks, and that is deliberate. A flat die is held for 3 years or 300,000 pieces, a half-relief die for 1 year or 50,000 pieces. A repeat order on a die still inside its service life pays no tooling at all, and we match the new run to the previous production colour instead of remixing from a fresh reference — so year three looks like year one.

For a programme that reissues the same pin every season, this is the difference between a margin and no margin.

Samples and lead times

A sample is RMB 200 per design and takes 7 to 10 days from artwork approval. It comes off the production die and the production colour mix, so the piece you sign off is the piece that gets cast.

These are counted from artwork approval, not from your first email. If an event or a retail launch fixes your date, put that date in the first message and we will say straight away whether it is achievable — we would rather turn down a date we cannot hold than quote it and miss it.

Packing a bulk order

Cartons are packed to one packing list per order, and mixed designs can be bagged separately inside the same carton so a distributor can pick a single SKU without opening the others.

If you need retail-ready bags, your own barcode labels or a specific carton mark, say so in the first email rather than after production starts — packing is the step where a good run most often gets spoiled by a late request.

Bulk runs next to the rest of the set

Most bulk enamel pin orders travel with something else from the same floor: a custom badge for the same programme, a custom keychain for the same event, a custom bottle opener for the same bar. Because all of them go through one tooling shop and one production floor, a mixed order keeps one colour reference and one delivery date instead of three.

What to send for a bulk quote

Vector artwork in AI, PDF or EPS; the finished size in millimetres; the quantity per design; the number of designs if you are mixing; the date the goods must be in your hands; and anything specific about packing. That is enough for a full quote — tooling, unit price and a delivery date — usually answered inside 20 minutes during Dongguan business hours.

If all you have is a photo of an existing pin or a hand sketch, send it anyway. Telling you what has to be redrawn before a die can be cut is the single most useful thing we can do before you spend money.

Looking for a supplier rather than a quantity? Read how to check an enamel pin manufacturer before you send the first email.

Frequently asked

What is the minimum order for bulk enamel pins?

5,000 pieces per design. Several designs can share one order and one shipment, and each design carries its own die fee. Below 5,000 pieces a print-on-demand shop will serve you better, and we would rather say so than waste your week.

Does the unit price drop with quantity?

The die is a fixed cost, so the unit price falls as the run grows — the tooling is a visible line at 5,000 pieces and a rounding error at 50,000. The exact unit price also depends on colour count, finished size and plating, which is why we quote per job rather than publishing a price list that would be wrong for most orders.

Can I put several designs in one bulk order?

Yes. Each design gets its own die at RMB 700 flat or RMB 1,200 half-relief, and the whole order ships together on one colour reference and one packing list — which is the normal shape of a distributor restock.

Can you pack a bulk order for retail?

Yes. Cartons are packed to one packing list per order, and mixed designs can be bagged separately inside the same carton so you can pick one SKU without opening the rest. Retail-ready bags, your own barcode labels and specific carton marks are all possible — tell us in the first email, not after production starts.

Keep going

Send your drawing, get a price the same day

Artwork, size, quantity and deadline are all we need. A specialist replies with tooling cost, unit price and a delivery date, usually inside 20 minutes.

Request a quote