Bulk enamel pins
How quantity changes the unit price, and mixed designs in one run.
Volume buying →Tooling handled end to end · 5,000 pcs min · 20-minute quotes
Send artworkEnamel pin manufacturer
4,000 m² in Dongguan, 3 die-casting presses, 120 staff, BSCI and Sedex audited, 5,000 pcs per design. Five questions to ask any pin supplier — and our answers to all five.
Anyone can put "enamel pin manufacturer" in a page title. The useful question is what happens in the first two emails, because five answers cannot be faked cheaply and every one of them is checkable before you pay anything.
1. Where does the die live, and how long is it kept? A working shop answers with a life in years or pieces, because it has a rack and a rule. A reseller answers with "don't worry" or changes the subject. Ours: flat dies are held for 3 years or 300,000 pieces, half-relief dies for 1 year or 50,000.
2. Is the sample struck on the production die, or on a temporary one? A sample off a temporary die proves nothing about the run. Ours comes off the production die and the production colour mix, so the piece you sign off is the piece that gets cast.
3. How is colour fixed? "Navy blue" is not a colour, it is a conversation. The answer you want is a Pantone number or a physical approved sample, held on file for the repeat run.
4. Ask one technical question the trade would know. Ours would be: how is a half-relief pin made to stand up from its rim? The answer is a stepped die — the centre is cut one level above the edge, so light falls across the step and a crest reads from across a room. A flat die keeps one plane and the enamel sits in the recess.
5. Ask for footage of the casting step, not the finished product. Finished pins are photographed by everyone, including people who never touch a press.
The minimum is not a sales tactic, it is the die. Cutting, hardening and testing a die costs the same whether it runs 500 pieces or 500,000, and below a few thousand pieces the tooling dominates the unit price until the order stops making sense for either side. If you need 300 pins for a wedding, a print-on-demand shop is genuinely the better answer and we will tell you so.
Above the minimum, the maths flips: at 50,000 pieces the die nearly disappears into the unit price, which is why the same pin gets materially cheaper as the run grows.
Audit reports and site visits are handled at the supplier-onboarding stage of a real programme, not as a precondition to quoting — buyers reasonably want a price before they spend a week on due diligence, and we would rather quote first. Before that stage, we are happy to walk you through the floor on a live video call: the presses, the tooling racks, the colour station and packed cartons. If your process requires an on-site audit, say so in the first email and we will set out what it involves.
Four things get you a real number instead of a range: vector artwork in AI, PDF or EPS; the finished size in millimetres; the quantity per design; and the date the goods must be in your hands. Add the colour reference if you already have one, and the number of designs if you are mixing.
If all you have is a photo of an existing pin or a hand sketch, send it anyway. Telling you what has to be redrawn before a die can be cut is the single most useful thing we can do before you spend money — an artwork that cannot be cut cleanly is the most common reason a first order runs late.
A programme rarely needs only pins. Custom badges, custom keychains, custom bottle openers, medals and lanyards for the same event can all be quoted into one shipment with one colour reference and one delivery date, which is the part that saves a buyer real administration.
Buying in volume rather than looking for a supplier? Read bulk enamel pins for how quantity changes the price.
5,000 pieces per design. Several designs can share one order and one shipment, each carrying its own die fee. Below that, a print-on-demand shop will serve you better — the tooling dominates the unit price until the run gets big enough to absorb it.
BSCI and Sedex reports are on file, along with brand supply-chain audits for licensed programmes. Reports and site visits are handled at the supplier-onboarding stage of a programme rather than as a precondition to quoting; before that we are glad to walk you through the floor on a live video call.
Usually inside 20 minutes during Dongguan business hours. The reply carries tooling cost, unit price and a delivery date, quoted in US dollars — not a request to "contact us for details".
Vector artwork (AI, PDF or EPS), finished size in millimetres, quantity per design and your deadline. A photo of an existing pin or a hand sketch works too — we will tell you what has to be redrawn before a die can be cut.
How quantity changes the unit price, and mixed designs in one run.
Volume buying →The floor, the presses and the colour station, in numbers.
Production →Send artwork and get tooling, unit price and a date.
Request a quote →Artwork, size, quantity and deadline are all we need. A specialist replies with tooling cost, unit price and a delivery date, usually inside 20 minutes.