Custom keychains
Zinc alloy keychains in bulk, mixed designs accepted.
Custom keychains →Tooling handled end to end · 5,000 pcs min · 20-minute quotes
Send artworkCustom bottle openers
Die-cast openers for bars, breweries, festivals and gift boxes: RMB 700 flat die, 5,000 pieces per design, 25 days for the first 10,000 pieces.
From the bench
Cast, ground and packed in the same building as your pins, so a mixed order leaves under one packing list.
A custom bottle opener from AnvilPins is a zinc alloy die-casting, colour-filled and packed in the same building in Dongguan. It is not a bought-in blank that gets printed on: the shape, the relief and the colour are all part of the tool, which is why the opener can carry a crest, a logo or a mascot rather than a flat sticker.
That matters most when the opener is meant to survive: the one on a bar's keyring, the one a brewery hands out at a festival, the one a company puts in a gift box. Printed pieces look used after a month; a casting does not.
| Flat die | Half-relief die | |
|---|---|---|
| Tooling | RMB 700 per design | RMB 1,200 per design |
| Best for | Type and line art, clean marks | Crests, characters, shapes with depth |
| Die life | 3 years or 300,000 pieces | 1 year or 50,000 pieces |
The die is charged once per design and quoted in RMB; quotations and invoices are issued in US dollars. Quantity drives the unit price: production starts at 5,000 pieces, and the per-piece cost falls as the run grows. Colour count inside a design is not capped and does not change the tooling price.
An opener is almost never ordered alone. The usual pattern is one event, several products: a custom pin for the lapel, a custom badge for the club, custom keychains for the gift bag and openers for the bar. Because all four share one tooling shop and one floor, they can share a colour reference and a single delivery date — one carton, one invoice, one person to ask when something is late.
If the project also needs medals or lanyards, put them in the same email: they are priced into the same basket and scheduled against the same delivery date, so the whole set is confirmed as one instruction.
A sample costs RMB 200 per design and takes 7 to 10 days from artwork approval, produced from the production die and the production colour mix. Lead time for the run itself is 25 days for 10,000 pieces, 35 days for 50,000 and 40 to 50 days for 100,000, counted from artwork approval.
Vector artwork (AI, PDF or EPS), the size in millimetres, quantity per design and your deadline. If the opener has to work with a specific bottle cap or sit in a specific gift box, say so — it affects the shape and we would rather adjust the die before it is cut than after.
Artwork is quoted by a sales specialist during Dongguan business hours, with a target reply time of 20 minutes.
5,000 pieces per design, and several designs can ship together. The minimum comes from the die: every design needs its own tool, cut in our own tooling shop.
Yes. Pins, badges, keychains and openers are all castings from the same tooling shop, so they can share a colour reference and one delivery date, packed in one shipment.
RMB 700 for a flat die and RMB 1,200 for a half-relief die, charged once per design and stored on our racks for 3 years or 300,000 pieces (flat) and 1 year or 50,000 pieces (half-relief). Quotations are issued in US dollars.
25 days for 10,000 pieces, 35 days for 50,000 and 40 to 50 days for 100,000, counted from artwork approval. Add 7 to 10 days for a sample.
Zinc alloy keychains in bulk, mixed designs accepted.
Custom keychains →Cast badges for schools, clubs and staff recognition.
Custom badges →Send artwork and get tooling, unit price and a date in one reply.
Request a quote →Artwork, size, quantity and deadline are all we need. A specialist replies with tooling cost, unit price and a delivery date, usually inside 20 minutes.